Events Calendar

 

 2020 

November AGM - date to be decided

 

Welcome to the Knowledge Garage.

Working in the media?

Stuck for contact on a motoring story or issue?

Need a friendly voice to speak with authority or a face to show you or your audience how to do something?

Meet the experts in the Knowledge Garage set up by thewesterngroup to solve your media problems with a phone call or email. If you want to Meet the Experts, contact  editor@thewesterngroup.co.uk .

  

Tweets by @WGMWriters

 

Keep in touch.

Make sure we have your latest email address to keep you informed on thewesterngroup events and website updates every month. Send your updates to

 editor@thewesterngroup.co.uk

Members' blogs & sites

Keep up to date with our members' websites, views and blogs by checking out carjourno.co.uk ,drive.co.uk , wheels-alive.co.uk , wheelswithinwales.uk , just-auto.com and automotiveblog.co.uk

Looking for something ?

From the chair: March 2020

publication date: Mar 2, 2020
 | 
author/source: Kieron Fennelly

 

The motor industry has been dealing with exhaust waste since the 1970s but another issue is now rolling into view.

The catalytic converter which largely took care of hydrocarbon emissions also obliged refineries to remove lead, a known toxin, from petrol. Used as an octane booster, lead corrupted the noble metals of the catalyst, destroying its purifying qualities.

Governments were slower to recognise the toxic output of diesel exhausts and in Europe it was not until the Euro 6 standard, mandatory for on HGVs from 2013, though not for cars until 2016 which has brought about a serious reduction of NOx.

The SCR, or selective catalytic reduction, has, thanks to its chemical treatment of the exhaust, eliminated all but the smallest particulate matter and the planned replacement of diesel traction in urban areas over the next decade should help to remove areas of the most dangerous concentrations of particles.

There are other aspects of vehicle operation which generate particles, but unrelated to combustion. If brake dust is very difficult to quantify, it too is likely to diminish in urban areas as electric drive which uses engine braking will mean fewer brake applications.

Tyres pose a greater problem. A tyre weighing say 20kg new will cross the scales at 10% less at the end of its life. That means a couple of kilograms of rubber have disappeared into the atmosphere as particulate matter, a worry given the potential health consequences. 

Tyre manufacturers are aware of this and since 2018 have been collaborating to establish a standardized abrasion test for tyres enabling them to be graded not only for grip and wear qualities as now but also for abrasion. The intention is to be able to give the consumer the choice of least polluting rubber and subsequent regulation will probably bring the end of the ‘budget’ tyre.

EVs are heavier so have faster tyre wear which lends urgency to a matter which may see the biggest changes in tyre technology since radials replaced crossplies.




All articles & images are copyright of their creators